Figure 42: Straight Barrel Grounding Lug
Steps
To attach the ground cable to the chassis, perform the following steps:
Procedure
Step 1
Use the crimping tool mandated by the lug manufacturer to crimp the lug to the ground cable.
Step 2
Use the torque-driver to attach the lug and ground cable to either grounding point .
The two grounding point screws are required for proper bonding and grounding of the chassis and
should not be removed.
Note
Hardware Installation Guide for the Cisco NCS 4000 Series
60
Installing Power Components
Installing the Chassis Ground Cable
Summary of Contents for NCS 4000 Series
Page 2: ......