Figure 48: DC Power Front Connection Adapter
Prerequisites
• If the rear to front power adapter is going to be used, then the sub assembly needs to be attached first to
the chassis and then both units installed in a rack or cabinet.
• The chassis should be completely removed from the packaging and installed in the rack or cabinet.
Tools and Equipment
• 6-inch, number-1 Phillips screwdriver
• One DC Power Front Connection Adapter (NCS4K-DC-FA, includes brackets)
• 3/8 Ratchet Wrench, 7/16 Socket, and a Torque Wrench
Steps
Procedure
Step 1
Install the DC-FA (front access) brackets on the sides toward the front of the DC adapter. There are three
different types of bracket depending upon rack type: ANSI 19 inch or 23 inch and ETSI. Choose the correct
type for your specific rack.
Hardware Installation Guide for the Cisco NCS 4000 Series
67
Installing Power Components
Installing the DC Power Front Connection Adapter
Summary of Contents for NCS 4000 Series
Page 2: ......