Table 3: Slot and Card Symbols
Definition
Symbol Color/Shape
Slots LC0 through LC15. Only install line cards with
a circle symbol on the faceplate.
Orange/Circle
Slots LC0 through LC15. Only install line cards with
circle or a triangle symbol on the faceplate.
Pink/Triangle
Slots LC0 through LC15. Only install line cards with
a blue hexagon symbol on the faceplate.
Blue/Hexagon
Slots RP0 and RP1. Only install route processor cards
with a square symbol on the faceplate.
Purple/Square
Slots FC0 through FC3. Only install fabric cards with
a cross symbol on the faceplate.
Lilac/Cross
Chassis Cable Management
The Cisco NCS 4016 chassis has cable management features for the front side only. The horizontal cable
management brackets are located above and below the card cages.
Safety Guidelines
Before you perform any Cisco NCS 4016 chassis installation procedures, review the safety guidelines in this
section to avoid injuring yourself or damaging the equipment.
Review the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco Network
Convergence System 4000 Series before installing, configuring, or troubleshooting any installed card.
Note
Power off the system before removing or installing a power tray.
Note
The following guidelines are for your safety and to protect equipment. The guidelines do not include all
hazards. Be alert.
•
Never attempt to lift an object that might be too heavy for you to lift by yourself.
•
Keep the work area clear and dust-free during and after installation. Do not allow dirt or debris to enter
into any laser-based components.
•
Keep tools and chassis components away from walk areas.
•
Do not wear loose clothing, jewelry, and other items that could get caught in the chassis while working
with the chassis and its components.
Hardware Installation Guide for Cisco NCS 4000 Series
13
Chassis Overview
Chassis Cable Management
