Description
Component
The FCC has cable management features on the front and rear sides of the FCC. These
brackets organize the interface cables entering and exiting the different cards, keeping
them out of the way and free of sharp bends that may damage the cables.
Four horizontal cable management brackets are preinstalled on the FCC (two on the
front side and two on the rear side of the FCC (
Figure 1: Front View of the Cisco NCS
and
Figure 2: Rear View of the Cisco NCS 6000 FCC
). Each side of the
FCC has one cable management bracket above the upper card cage and one cable
management bracket below the lower card cage.
Cable management brackets
Four vertical cable troughs are supplied for cable management, two on the front side
of the FCC and two on the rear side of the FCC.
Cable troughs
A temperature sensor is located on the lower rear side of the FCC.
Temperature sensor assembly
A craft panel display, located on the front of the FCC (
), consists of an LCD touch-screen display and LEDs used to
indicate system alarms. The craft panel has a basic interface used to monitor the operation
of the FCC.
Craft panel display
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
6
Overview
Fabric Card Chassis Components