S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-76
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
feature ntp
feature ntp
To enable the Network Time Protocol (NTP), use the
feature ntp
command. To disable NTP, use the
no
form
of this command.
feature ntp
no feature ntp
Syntax Description
This command does not have any arguments or keywords.
Defaults
Enabled
Command Modes
Global configuration mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable NTP:
switch#
configure terminal
switch(config)#
feature ntp
This example shows how to disable NTP:
switch#
configure terminal
switch(config)#
no
feature ntp
Related Commands
Release
Modification
6.0(2)U(2)1
This command was introduced.
Command
Description
ntp master
Configures the device to act as an authoritative NTP server.