S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-111
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
logging module
logging module
To enable module log messages, use the
logging module
command. To disable module log messages,
use the
no
form of this command.
logging module
[
severity-level
]
no logging module
Syntax Description
Command Default
None
Command Modes
Global configuration mode
Command History
Usage Guidelines
Set a specified severity level or use the default.
Examples
This example shows how to enable module log messages:
switch#
configure terminal
switch(config)#
logging module
switch(config)#
Related Commands
severity-level
(Optional) Number of the desired severity level at which messages should be
logged. Messages at or numerically lower than the specified level are logged.
Severity levels are as follows
:
•
0
—emergency: System unusable
•
1
—alert: Immediate action needed
•
2
—critical: Critical condition
•
3
—error: Error condition
•
4
—warning: Warning condition
•
5
—notification: Normal but significant condition—default level
•
6
—informational: Informational message only
•
7
—debugging: Appears during debugging only
Release
Modification
5.0(3)U1(1)
This command was introduced.
Command
Description
show logging module
Displays the module logging status.