S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-132
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
ntp authenticate
ntp authenticate
To enable Network Time Protocol (NTP) authentication, use the
ntp authenticate
command. To disable
NTP authentication, use the
no
form of this command.
ntp authenticate
no ntp authenticate
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled
Command Modes
Global configuration mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable NTP authentication:
switch(config)#
ntp authenticate
switch(config)#
This example shows how to disable NTP authentication:
switch(config)#
no
ntp authenticate
switch(config)#
Release
Modification
6.0(2)U(2)1
This command was introduced.