S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-245
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp source
show ntp source
To display information about the Network Time Protocol (NTP) source, use the
show ntp source
command.
show
ntp
source
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the NTP source information:
switch(config)#
show ntp source
Related Commands
Release
Modification
6.0(2)U(2)1
This command was introduced.
Command
Description
ntp source
Configures the NTP source.