S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-246
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ntp source-interface
show ntp source-interface
To display the Network Time Protocol (NTP) source interface, use the
show ntp source-interface
command.
show
ntp
source-interface
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the NTP source interface:
switch(config)#
show ntp source-interface
Source interface loopback1
switch(config)#
Related Commands
Release
Modification
6.0(2)U(2)1
This command was introduced.
Command
Description
show startup-config
ntp
Displays information about the startup NTP configuration of the switch.
show running-config
ntp
Displays information about the NTP configuration that is currently running
on the switch.