S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-12
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
action reload
action reload
To specify the action of reloading the Cisco Nexus 3000 Series switch software when an Embedded
Event Manager (EEM) applet is triggered, use the
action reload
command. To remove the action of
reloading the Cisco Nexus 3000 Series switch software, use the
no
form of this command.
action
label
num1
[.
num2
]
reload
no action
label
num1
[.
num2
]
reload
Syntax Description
Defaults
None
Command Modes
Embedded event manager configuration mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to specify the action of reloading the Cisco Nexus 3000 Series switch software
when an EEM applet is triggered:
switch#
configure terminal
switch(config)#
event manager applet reload-applet
switch(config-applet)#
action 1.5 reload
switch(config-applet)#
Related Commands
label
num1
[.
num2
] Unique identifier that can be any string value. Actions are sorted and run in an
ascending alphanumeric sequence using the
label
as the sort key. The range for
num1 is from 1 to 16 and the range for num2 is from 0 to 9.
Release
Modification
5.0(3)U3(1)
This command was introduced.
Command
Description
action cli
Configures a virtual shell (VSH) command string to be executed when an
Embedded Event Manager (EEM) applet is triggered.
action counter
set or modify a named counter when an Embedded Event Manager (EEM)
applet is triggered.
action event-default
Specifies that the default action for the event is to be performed when an
Embedded Event Manager (EEM) applet is triggered.
action policy-default
Enables the default action of the policy being overridden.