S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-67
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event snmp
Defaults
None
Command Modes
Embedded event manager configuration mode
Command History
Usage Guidelines
This command does not require a license.
entry-val
value
Specifies
the
value
with which the contents of the current object ID are compared
to decide if an SNMP event should be raised. The range is from 0 to
18446744073709551615.
exit-comb
(Optional) Indicates the combination of exit conditions that must be met before
event monitoring is reenabled.
or
(Optional) Specifies that an exit comparison operator and an exit object ID value
or an exit time value must exist.
and
(Optional) Specifies that an exit comparison operator, an exit object ID value, and
an exit time value must exist.
exit-op
op
(Optional) Compares the contents of the current object ID with the exit value
using the specified operator:
•
gt
—Greater than
•
ge
—Greater than or equal to
•
eq
—Equal to
•
ne
—Not equal to
•
lt
—Less than
•
le
—Less than or equal to
If there is a match, an event is triggered and event monitoring is reenabled.
Note
This keyword and its argument are not optional if the
exit-comb
keyword
is defined.
exit-val
value
(Optional) Specifies the value with which the contents of the current object ID are
compared to decide whether the exit criteria are met. The range is from 0 to
18446744073709551615.
Note
This keyword and its argument are not optional if the
exit-comb
keyword
is defined.
poll-interval
value
Specifies the time interval between consecutive polls. The
value
is an integer that
represents seconds in the range from is from 1 to 2147483647.
Release
Modification
5.0(3)U3(1)
This command was introduced.