S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-69
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
event storm-control
event storm-control
To specify an event criteria for an Embedded Event Manager (EEM) applet that is run on the basis of a
storm-control, use the
event storm-control
command. To remove the storm-control event criteria, use
the
no
form of this command.
event storm-control
no event storm-control
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Embedded event manager configuration mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to specify that an EEM applet runs when a storm-control occurs:
switch#
configure terminal
switch(config)
event manager applet cli-event
switch(config-applet)#
event storm-control
switch(config-applet)#
Release
Modification
5.0(3)U3(1)
This command was introduced.