S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-194
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show diagnostic result
show diagnostic result
To display the results of the diagnostic tests, use the
show diagnostic result
command.
show diagnostic result
module
{
module-no
|
all
}
Syntax Description
Command Default
None
Command Modes
EXEC mode
Command History
Examples
This example shows how to display the diagnostic results for a specific module:
switch#
show diagnostic result module 1
Related Commands
module
Specifies the module for which diagnostic results are displayed.
module-no
Module number. Valid values are 1 to 3.
all
Displays the diagnostic results for all modules.
Release
Modification
5.0(3)U1(1)
This command was introduced.
Command
Description
diagnostic bootup level
Configures the bootup diagnostic level for a faster module bootup time.
show diagnostic
bootup level
Displays the bootup diagnostics level.
