S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-253
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp clock foreign-masters-record
show ptp clock foreign-masters-record
To display information about the state of foreign masters known to the Precision Time Protocol (PTP)
process, use the
show ptp clock foreign-masters-record
command.
show ptp clock foreign-masters-record
[
interface ethernet
slot
/
port
]
Syntax Description
Command Default
None
Command Modes
Any command mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information about the state of foreign masters known to the PTP
process:
switch#
show ptp clock foreign-masters-record
This example shows how to display information about the state of foreign masters known to the PTP
process for the Ethernet interface 1/5:
switch#
show ptp clock foreign-masters-record interface ethernet 1/5
interface
(Optional) Specifies an interface.
ethernet
Specifies an IEEE 802.3z Ethernet interface.
slot/port
Slot number of the Ethernet interface. The slot number is from 1 to 255 and
the port number is form 1 to 128.
Release
Modification
5.0(3)U2(2)
This command was introduced.