S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-255
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
show ptp corrections
show ptp corrections
To display the history of the Precision Time Protocol (PTP) clock corrections on the Ethernet interfaces,
use the
show ptp corrections
command.
show ptp corrections
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the history of the PTP clock corrections on the Ethernet interfaces:
switch#
show ptp corrections
Related Commands
Release
Modification
5.0(3)U2(2)
This command was introduced.
Command
Description
show ptp brief
Displays the PTP status.
show ptp clock
Displays the properties of the local clock.
show ptp clock
foreign-masters-record
Displays the state of foreign masters known to the PTP process.
show ptp parent
Displays the properties of the PTP parent.
show ptp port
Displays the status of the PTP port.
show ptp time-property
Displays the properties of the PTP clock.
