S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
-SM-301
Cisco Nexus 3000 Series NX-OS System Management Command Reference
OL-29557-04
Chapter System Management Commands
snmp-server context
snmp-server context
To configure the Simple Network Management Protocol (SNMP) context to logical network entity
mapping, use the
snmp-server context
command. To remove the context, use the
no
form of this
command.
snmp-server context
context-name
[
instance
instance-name
] [
vrf
{
vrf-name
|
default
|
management
}] [
topology
topology-name
]
no snmp-server context
context-name
[
instance
instance-name
] [
vrf
{
vrf-name
|
default
|
management
}] [
topology
topology-name
]
Syntax Description
Command Default
None
Command Modes
Global configuration mode
Command History
Usage Guidelines
Use the
snmp-server context
command to map between SNMP contexts and logical network entities,
such as protocol instances or VRFs.
Examples
This example shows how to map the public1 context to the default VRF:
switch#
configure terminal
switch(config)#
snmp-server context public1 vrf default
switch(config)#
context-name
SNMP context. The name can be any alphanumeric string up to 32
characters.
instance
instance-name
(Optional) Specifies a protocol instance. The name can be any alphanumeric
string up to 32 characters.
vrf
vrf-name
(Optional) Specifies the virtual routing and forwarding (VRF) instance. The
name is case sensitive, and can be a maximum of 32 alphanumeric
characters.
default
Specifies the default VRF.
management
Specifies the management VRF.
topology
topology-name
(Optional) Specifies the topology. The name can be any alphanumeric string
up to 32 characters.
Release
Modification
5.0(3)U1(1)
This command was introduced.
