4-22
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Chapter 4 Installing a Cisco Nexus 7010 Chassis
Installing the Front Doors and Frame Assembly
Figure 4-15
Attaching the Side Frame Assemblies to the EMI Panel
c.
Realign the EMI panel to the air intake area on the chassis, screw its four captive screws to the
chassis, and tighten the captive screws to 8 in-lb (0.9 N·m).
1
Right side frame.
3
Use two 6-32 x 1/2-inch flat-head screws to attach the right side
frame to the right side of the EMI panel. Tighten the screws to
8 in-lb (0.9 N·m).
2
Left side frame.
4
Use two 6-32 x 1/2-inch flat-head screws to attach the left side
frame to the left side of the EMI panel. Tighten the screws to 8
in-lb (0.9 N·m).
Summary of Contents for Nexus 7004
Page 12: ...Contents xii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 19: ... xix Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 22: ... xxii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
