E-5
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Repacking the System Components
m.
Tape the larger flaps together and to the box (see Callout 12 in
Figure E-1
).
Step 5
If there is an air filter attached to the chassis, remove and repack it as follows:
a.
Open the air filter box, place a layer of padding in the bottom of the box, and place the four-sided
padding in the box (see Callouts 4, 5, and 6 in
Figure E-2
).
Figure E-2
Packing the Air Filter for the Cisco Nexus 7004 Chassis
b.
Unscrew the eight M3 screws that fasten the air filter to the right side of the chassis.
c.
Remove the air filter from the chassis and center it on the trifold piece of cardboard found with the
packing materials (see Callouts 1 and 2 in
Figure E-2
).
d.
Fold the two trifold flaps over the air filter (see Callout 3 in
Figure E-2
).
e.
Place the protected air filter inside the four-sided padding in the air filter box (see Callout 7 in
Figure E-2
).
f.
Place a layer of padding over the air filter in the air filter box (see Callout 8 in
Figure E-2
).
336016
4
10
10
1
3
3
2
8
7
6
5
9
1
Cardboard trifold protector for air filter
6
Four-sided padding
2
Air filter centered on trifold
7
Air filter in trifold placedinside the four-sided
padding in the air filter box
3
Two flaps folded over the air filter
8
Padding placed on top of air filter
4
Air filter box opened
9
Air filter box top folded over to close the box
5
Padding placed in the bottom of the air filter
box
10
Two flaps on air filter box inserted into slots
in the box walls.
Summary of Contents for Nexus 7004
Page 12: ...Contents xii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 19: ... xix Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 22: ... xxii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...