E-17
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Repacking the System Components
Figure E-10
Repacking the Front Door and Air Intake Frame
l.
Slide the air-intake frame and the hinge bracket inside separate slots of the protective cardboard
insert (see Callouts 2, 3, and 4 in
Figure E-10
), and place the cardboard insert in the bottom of the
box.
m.
Place the small parts bag in the open slot of the cardboard insert (see Callout 5 in
Figure E-10
).
n.
Place the front door, which is wrapped in bubblewrap, inside the box (see callout 6 in
Figure E-10
).
o.
Fold the flaps of the box on top of the front door (see Callouts 7 and 8 in
Figure E-10
).
p.
Secure the top two flaps together and to the box using packing tape (see Callout 9 in
Figure E-10
).
Step 8
Remove and repack the cable management frames as follows:
a.
Remove the top cable management frame by unscrewing its four M4 screws (two on each side as
shown in
Figure E-11
) and pulling the frame off the chassis. Place the screws in a bag for small
accessory kit parts.
6
4
7
8
7
8
336018
3
5
2
1
9
1
Box for the front door and air intake frame
6
Front door wrapped in bubble wrap
2
Hinge bracket for the front door
7
Shorter box flaps folded over the front door
3
Air-intake frame
8
Longer box flaps folded over the shorter flaps
4
Protective cardboard insert with slots
available for the hinge bracket and air-intake
frame
9
Tape securing the box flaps together and to the
box
5
Small parts bag placed in open slot
Summary of Contents for Nexus 7004
Page 12: ...Contents xii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 19: ... xix Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 22: ... xxii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...