E-32
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Repacking the System Components
Figure E-18
Packing AC Power Supply Units in a Cisco Nexus 7018 Multi-Unit Box
b.
Make sure there is a packing cushion below the cardboard holder (see Callout 2 in
Figure E-18
).
c.
Loosen the four captive screws on the power supply unit so that they no longer connect with the
chassis.
d.
With one hand on the handle of the power supply unit, pull the unit partially out of the chassis.
1
Open the power supply box.
5
Place the top pad on top of the power supply units.
2
Make sure that the bottom pad and
cardboard holders are in place in the box.
6
Fold the narrow flap over the top of the top pad.
3
Place AC power supply units in
alternating slots (leave at least one slot
empty between power supply units).
7
Fold the wide flaps over the folded narrow flaps.
4
Coil the power cords and place them in
the slots next to their power supply units.
8
Tape the wide flaps together and to the box with
packing tape.
Summary of Contents for Nexus 7004
Page 12: ...Contents xii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 19: ... xix Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 22: ... xxii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
