E-49
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Appendix E Repacking the Cisco Nexus 7000 Series Switch for Shipment
Repacking the System Components
Step 18
Lower the chassis to the level of the pallet or no more than 0.25 inches (0.6 cm) above the pallet.
Caution
You need two persons for the following step.
Step 19
Use at least two persons to push the chassis onto the raised portion of the pallet. Position the chassis so
that it is 4 inches (10.2 cm) away from the side of the common edge of the pallet and its raised portion.
Step 20
Attach two angle brackets to the raised portion of the pallet between the chassis and the pallet edge. Do
not tighten the screws that hold these brackets to the pallet—you will need to adjust their placement after
you place the chassis on the pallet. See
Figure E-32
.
Figure E-32
Attaching the Chassis to the Shipping Pallet
1
Lower pallet
4
Bolts holding brackets to the upper pallet
2
Raised portion of the pallet
5
Screws holding the chassis to the brackets
3
Mounting brackets (two shown and two are on
the other side of the chassis)
Summary of Contents for Nexus 7004
Page 12: ...Contents xii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 19: ... xix Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 22: ... xxii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
