3-31
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-07
Chapter 3 Installing a Cisco Nexus 7009 Chassis
Installing the Front Door and Air Intake Frame
Figure 3-21
Attaching the Hinge Bracket to the Cable Management Frames and Chassis
Step 6
Tighten the four M4x8 screws that fasten the hinge bracket to the chassis to 11 to 15 in-lb (1.2 to
1.7 N·m).
Step 7
Tighten the four M4x8 screws that fasten the hinge bracket to the cable management frame to 11 to
15 in-lb (1.2 to 1.7 N·m).
Step 8
Align the two captive screws on the air intake frame to the two screw holes below the cable management
frames on the chassis as shown in
Figure 3-22
.
1
Four M4x8 pan-head screws that fasten the
hinge bracket to the chassis.
2
Four M4x8 pan-head screws that fasten the
hinge bracket to the left and right cable
management assemblies.
Summary of Contents for Nexus 7004
Page 12: ...Contents xii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 19: ... xix Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
Page 22: ... xxii Cisco Nexus 7000 Series Hardware Installation and Reference Guide OL 23069 07 ...
