S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
9-51
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Chapter 9 Replacement Procedures
Replacing the Front Doors and Frame Assembly on the Cisco Nexus 7010 Chassis
Figure 9-24
Attaching the Side Frame Assemblies to the EMI Panel
Step 7
Realign the EMI panel to the air intake area on the chassis, screw its four captive screws to the chassis,
and tighten the captive screws to 8 in-lb (0.9 N·m).
1
Right side frame.
3
Use two 6-32 x 1/2-inch flat-head screws to
attach the right side frame to the right side of the
EMI panel. Tighten the screws to 8 in-lb (0.9
N·m).
2
Left side frame.
4
Use two 6-32 x 1/2-inch flat-head screws to
attach the left side frame to the left side of the
EMI panel. Tighten the screws to 8 in-lb (0.9
N·m).
