S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
B-2
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-23069-06
Appendix B Transceivers and Module Connectors
10-Gigabit SFP+ Transceivers and Fabric Extender Transceivers
identifies the major features of these transceivers. For the cable specifications that apply to
these transceivers (FETs), see
. For the physical and environmental specifications, see
. For the environmental specifications that apply to these transceivers, see
Figure B-1
SFP+ Transceivers and FETs
Table B-1
SFP+ Transceivers Used with Each I/O Module
Transceiver
I/O Module
8-port 10-Gigabit
(N7K-M108X2-12L)
32-port 10-Gigabit
(N7K-M132XP-12)
32-port 10-Gigabit
with XL option
(N7K-M132XP-12L)
32-port 1- and
10-Gigabit
(N7K-F132XP-15)
48-port 1- and
10-Gigabit
(N7K-F248XP-25)
SFP-10G-FET
X
1
X
1
X
1
SFP-10G-ER
X
X
X
X
SFP-10G-LR
X
X
X
2
X
SFP-10G-LRM
X
X
X
SFP-10G-SR
X
3
X
X
X
X
SFP-H10GB-CU1M
X
3
X
2
X
X
SFP-H10GB-CU3M
X
3
X
2
X
X
SFP-H10GB-CU5M
X
3
X
2
X
X
SFP-H10GB-ACU7M
X
2
X
X
X
SFP-H10GB-ACU10M
X
2
X
X
X
1.
The FET-10G transceiver is used only for connections with a Cisco Nexus 2248TP, 2232PP, and 2224TP Fabric Extender (FEX).
2.
Requires revision 2 of this transceiver.
3.
Requires the OneX Converter Module (part number CVR-X2-SFP10G) when this transceiver is used with the 8-port 10-GB I/O module.
1
Receive optical bore
4
Clasp shown in open position
2
Transmit optical bore
5
Dust plug
3
Clasp shown in closed position
