◦
Slots 33 and 34 (labeled as PS 1 and PS 2) must be connected to one grid (Grid A)
◦
Slots 35 and 36 (labeled as PS 3 and PS 4)must be connected to another grid (Grid B)
Step 1
For each power supply, connect an AC power cable to the AC power source and to the power receptacle on the power
supply.
Step 2
Verify that the Output Power LED turns on and becomes green.
What to Do Next
When the power supplies are operating and the switch is fully powered, you are ready to connect the switch
to the network.
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
25
Installing a Chassis
Connecting the Switch to an AC Power Source