Managing the System
Applications
Cisco Small Business NSS300 Series Smart Storage Administration Guide
173
3
STEP 6
Click
Rescan media library
to enable rescan media library. This option is enabled
by default.
•
Daily Start Time
—From the drop-down lists, select the time in hour and
minutes. Hours are displayed in the 24-hour format.
STEP 7
Click
Apply
. Your Multimedia Station settings are updated to the NAS.
STEP 8
In the Reset admin password section, enter the following:
•
Password
—new password for the Multimedia admin account.
•
Verify Password
—re-enter the new password.
STEP 9
Click
OK
to continue.
STEP 10
The first time you connect to Multimedia Station, enter a new password for the
Multimedia admin account.
STEP 11
Click
Submit
to continue to the
Multimedia Station
window. If you have created
user accounts for the previous version of Multimedia Station, you can select
Keep
existing user accounts
to reserve the user accounts.
NOTE
The user accounts (including admin) of Multimedia Station are different from the
system user accounts on the NAS. For security reasons, it is recommended to use
a different password for the Multimedia admin account. The password can be a
maximum of 16 characters. Supported characters are A-Z, az, 0-9, -, !, @, #, $, %, _.
STEP 12
From the
Multimedia Station
window, click
Login
in the upper right corner.
STEP 13
Enter the user name with access rights to Multimedia Station and the password.
NOTE
If you login as the administrator (admin), you can create new users and configure
other advanced settings.
Multimedia Station consists of Media Center, My Jukebox, and Control Panel.
After the Multimedia Station is enabled, it can be accessed by selecting
Applications > Multimedia Station
from the top right corner of the Administration
window. If your NAS is using SSL, you can access Multimedia Station from the URL
https://<NAS IP address>:8081/MSV2
. The default port is 8081. If your NAS is
configured with a different port, use that port value for access to the Multimedia
Station application. You need a valid user account to log in to the main
management GUI.