Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide
58
3
To define the password rules:
STEP 1
Choose
Administration > General Settings > Password Strength
from the
Navigation menu. The
Password Strength
window opens.
STEP 2
Enable one or more of the Password Strength options to enforce password
strength:
•
The new password contains characters from at least three of the
following classes: lower case letters, upper case letters, digits, and
special characters
—This option forces the user to use at least three of
these classes of characters: lower-case letters, upper-case letters, digits,
and special characters. Special characters are characters such as “!,” “@,”
and “#.”
•
No character in the new password may be repeated more than three
times consecutively
—This option specifies that no character in the new
password can be entered consecutively three times in a row such as
“123ZZZabc.”
•
The new password must not be the same as the associated username, or
the username reversed
—This option specifies that the password cannot
contain a variation of the username used to login to the NAS.
•
The new password must not be "cisco", "ocsic", or any variant obtained
by changing the capitalization of letters therein, or by substituting “1” “|”
or “!” for i, and/or substituting “0” for “o”, and/or substituting “$” for
“s”
—This option specifies that the password cannot contain a variation of
the word “Cisco.”
STEP 3
Click
Apply
. The password rules are applied to the NAS.
Network
This section describes how to configure the network settings, such as:
•
•
•
