Cisco Small Business NSS324 and NSS326 Smart Storage
15
S
TEP
12
Click Next. You are redirected to a window where you can enter
the name for this server.
S
TEP
13
In the Server Name field, enter a name to identify the NAS device.
The server name can be a maximum length of 14 characters, which
supports alphanumeric characters (a-z, 0-9) and hyphens (-). It is
required that the server name begin with a letter versus a number.
The server name does not accept names with a space or period (.)
S
TEP
14
Click Next. You are redirected to a window where you can change
the administrator password.
N
OTE
The default administrator username is
admin.
The default
administrator password is
admin
.
S
TEP
15
Change the administrator password by entering the new
password in the Password field. To verify the password, re-enter it
in the Verify Password field.
S
TEP
16
Click Next. You are redirected to a window where you can enter
the date, time, and time zone for the server.
S
TEP
17
Enter the date, time, and time zone for this server. The options are:
•
Time Zone
—Select a time zone from the drop-down menu.
•
Date/Time
—Select the current date and time from the drop-
down menus.
•
Synchronize with an Internet time server automatically
—To
obtain time automatically from an NTP server, click this check
box.
•
Server
—From the drop-down list, select the NTP server name
and click
TEST
to verify status.
For example:
-
time-a.timefreq.bldrdoc.gov (default)
-
time-b.timefreq.bldrdoc.gov
-
time-c.timefreq.bldrdoc.gov
•
Set the server time the same as your computer time
—To
synchronize the server time/clock with the time/clock on your
computer, click this check box.
S
TEP
18
Click Next. You are redirected to a window where you can enter
the IP address, subnet mask, and default gateway for the device.
S
TEP
19
Enter the IP address, subnet mask, and default gateway for this
server. You can either acquire the IP address automatically from a
DHCP server or choose to configure a static IP address.
