5-66
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 5 Provision Transponder and Muxponder Cards
DLP-G235 Change Card Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards
Stop. You have completed this procedure.
DLP-G235 Change Card Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards
Note
Card settings can be changed only if the facilities are out of service (OOS).
Step 1
In node view, double-click the MXP_MR_2.5G or MXPP_MR_2.5G card where you want to change the
card settings.
Step 2
Click the
Provisioning > Card
tabs.
Step 3
Modify any of the settings described in
.
Step 4
Click
Apply
.
Step 5
Return to your originating procedure (NTP).
Purpose
This task changes the card settings for MXP_MR_2.5G and
MXPP_MR_2.5G muxponder cards.
Tools/Equipment
None
Prerequisite Procedures
DLP-G46 Log into CTC, page 2-25
Required/As Needed
As needed
Onsite/Remote
Onsite or remote
Security Level
Provisioning or higher
Table 5-41
MXP_MR_2.5G and MXPP_MR_2.5G Muxponder Card Settings
Parameter
Description
Options
Card Mode
Sets the mode of operation (option only
supported for SONET/SDH payloads).
Note
This setting is not currently
supported. The only option
available currently is FC-GE.
•
FC-GE
Wavelength
Sets the wavelength of the DWDM side
optical transmitter.
•
First Tunable Wavelength
•
Further wavelengths in 100-GHz ITU
spacing
•
Supported wavelengths are in white
and marked by asterisks (**);
unsupported wavelengths are gray.
Note
The four available wavelengths
are listed in the Card Parameters
section of the window and also in
the Maintenance > Info tab.
Summary of Contents for ONS 15454 DWDM
Page 38: ...Figures xxxviii Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 ...
Page 54: ...Procedures liv Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 ...
Page 64: ... 64 Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 Chapter ...