13-8
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 13 Maintain the Node
DLP-G249 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX)
Step 1
Insert the system software CD containing the reinitialization tool, software, and defaults database into
the computer CD-ROM drive. If the CTC Installation Wizard appears, click
Cancel
.
Step 2
To find the recovery tool file, go to the CISCO15454 directory on the CD (usually
/cdrom/cdrom0/CISCO15454 or /cdrom/cdrom0/CISCO15454SDH).
Step 3
If you are using a file explorer, double-click the
RE-INIT.jar
file. If you are working with a command
line, run
java -jar RE-INIT.jar
. The NE Re-Initialization window appears (
).
Step 4
Complete the following fields:
•
GNE IP—If the node you are reinitializing is accessed through another node configured as a GNE,
enter the GNE IP address. If you have a direct connection to the node, leave this field blank.
•
Node IP—Enter the node name or IP address of the node that you are reinitializing.
•
User ID—Enter the user ID needed to access the node.
•
Password—Enter the password for the user ID.
•
Upload Package—Check this box to send the software package file to the node. If unchecked, the
software stored on the node is not modified.
•
Force Upload—Check this box to send the software package file to the node even if the node is
running the same software version. If unchecked, reinitialization will not send the software package
if the node is already running the same version.
•
Activate/Revert—Check this box to activate the uploaded software (if the software is a later than
the installed version) or revert to the uploaded software (if the software is earlier than the installed
version) as soon as the software file is uploaded. If unchecked, the software is not activated or
reverted after the upload, allowing you to initiate the functions later from the node view
Maintenance > Software tab.
•
Re-init Database—Check this box to send a new database to the node. (This is equivalent to the CTC
database restore operation.) If unchecked, the node database is not modified.
•
Confirm—Check this box if you want a warning message displayed before any operation is
performed. If unchecked, reinitialization does not display a warning message.
•
Search Path—Enter the path to the CISCO15454 or CISCO15454SDH folder on the CD drive.
Step 5
Click
Go
.
Caution
Before continuing with the next step, verify that the database to upload is correct. You cannot reverse
the upload process after you click Yes.
Step 6
Review the information in the Confirm NE Re-Initialization dialog box, then click
Yes
to start the
reinitialization.
The reinitialization begins. After the software is downloaded and activated and the database is uploaded
to the TCC2/TCC2P cards, “Complete” appears in the status bar and the TCC2/TCC2P cards will reboot.
Wait a few minutes for the reboot to complete.
Step 7
After the reboot is complete, log into the node using the
“DLP-G46 Log into CTC” task on page 2-25
.
Step 8
Complete the
“NTP-G24 Set Up Name, Date, Time, and Contact Information” procedure on page 3-8
and the
“NTP-G26 Set Up CTC Network Access” procedure on page 3-11
.
Step 9
Return to your originating procedure (NTP).
Summary of Contents for ONS 15454 DWDM
Page 38: ...Figures xxxviii Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 ...
Page 54: ...Procedures liv Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 ...
Page 64: ... 64 Cisco ONS 15454 DWDM Installation and Operations Guide R6 0 August 2005 Chapter ...