1-86
Cisco ONS 15454 DWDM Procedure Guide, Release 9.2
78-19286-01
Chapter 1 Install the Cisco ONS 15454 Shelf Assembly
Required Tools and Equipment (ETSI)
(Router(config)#
interface FastEthernet0
(Router(config-if)#
no ip address
(Router(config-if)#
no ip route-cache
(Router(config-if)#
bridge-group
public VLAN ID
(Router(config)#
interface FastEthernet1
(Router(config-if)#
no ip address
(Router(config-if)#
no ip route-cache
(Router(config-if)#
bridge-group
public VLAN ID
Step 3
Enter the following commands to configure ports SSC 1 through SSC 7. Replace port with the port
number (2 to 8) and repeat for each port.
(Router(config)#
interface FastEthernet
port
(Router(config-if)#
no ip address
(Router(config-if)#
no ip route-cache
(Router(config-if)#
bridge-group
private VLAN ID
Step 4
Enter the following commands to configure port NC (port 9):
Router(config)#
interface FastEthernet9
(Router(config-if)
no ip address
(Router(config-if)
no ip route-cache
Router(config)#
interface FastEthernet9.2
(Router(config-if)
dot1Q
public VLAN ID
native
(Router(config-if)
no ip route-cache
(Router(config-if)
no snmp trap link-status
(Router(config-if)
bridge-group
public VLAN ID
Router(config)#
interface FastEthernet9.2
(Router(config-if)
encapsulation dot1Q
private VLAN ID
(Router(config-if)
no ip route-cache
(Router(config-if)
no snmp trap link-status
(Router(config-if)
bridge-group
private VLAN ID
Step 5
Enter the following commands to configure port PRT (port 10):
Router(config)#
interface FastEthernet10
(Router(config-if)
no ip address
(Router(config-if)
no ip route-cache
Router(config)#
interface FastEthernet10.1
(Router(config-if)
encapsulation dot1Q
public VLAN ID
native
(Router(config-if)
no ip route-cache
(Router(config-if)
no snmp trap link-status
(Router(config-if)
bridge-group
public VLAN ID
(Router(config-if)
bridge-group public VLAN ID priority 0
!
Router(config)#
interface FastEthernet10.2
(Router(config-if)
encapsulation dot1Q
private VLAN ID
(Router(config-if)
no ip route-cache
(Router(config-if)
no snmp trap link-status
(Router(config-if)
bridge-group
private VLAN ID
(Router(config-if)
bridge-group
private VLAN ID
priority 0
Router(config)#
interface FastEthernet11
Router(config)#
no ip address
Router(config)#
no ip route-cache
Router(config)#
shutdown
Step 6
Enter the following interface commands:
(Router(config)#
interface POS0
(Router(config)#
no ip address
Summary of Contents for ONS 15454
