Figure 78: Four-Degree Patch-Panel Tray
The following figure shows an eight-degree patch-panel tray.
Figure 79: Eight-Degree Patch-Panel Tray
Install PP-Mesh
The PP-Mesh is an ONS 15454 unit that can be installed either above or below the DWDM generating
equipment according to the local site practice.
The PP-Mesh is a 2 rack unit (RU) high. Each package includes one set of the following brackets:
• 19-inch (482.6-mm) or 23-inch (584.2-mm) reversible (two-way) mounting brackets that can be rotated
to fit either rack size. These reversible brackets are used for EIA and IEC standard racks.
• ETSI brackets that are used for ETSI standard racks.
Cisco ONS 15454 Hardware Installation Guide
163
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Install PP-Mesh
Summary of Contents for ONS 15454
