5-42
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
OL-3526-05
Chapter 5 Configuring Channelized mode for the Cisco PA-MC-2T3+
Checking the Configuration
Note
To enable and display remote performance reports, see the
“Setting the FDL Configuration for a T1
“Displaying Remote Performance Reports” section on page 5-42
Displaying Remote Performance Reports
To display performance data from the remote T1 equipment, use the following command:
show controllers T3 0/1/0 remote performance
.
Examples follow:
•
The example that follows is for a port adapter on a VIP in interface processor slot 1:
Router#
show controllers T3 1/1/0 remote performance
T3 1/1/0 is up. Hardware is 2CT3+ single wide port adapter
CT3 H/W Version : 1.0.0, CT3 ROM Version: 1.1, CT3 F/W Version: 0.23.0
FREEDM version: 1
T1 1 - Remote Performance Data
Data in current interval (356 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs
Data in Interval 1:
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs
Data in Interval 2:
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs
Total Data (last 2 15 minute intervals):
1 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs
0 Unavail Secs
T1 2 - Remote Performance Data
.
.
.
(additional displayed text not shown)
•
The example that follows is for a port adapter in slot 3 of a Cisco 7200 series router:
router# show controllers t3 3/0 remote performance tabular
T3 3/0 is down. Hardware is 2CT3+ single wide port adapter
CT3 H/W Version : 0.1.1, CT3 ROM Version : 0.95, CT3 F/W Version : 1.3.2
FREEDM version: 1, reset 0
T1 1 - Remote Performance Data (Not available)
T1 2 - Remote Performance Data (Not available)
T1 3 - Remote Performance Data (Not available)
T1 4 - Remote Performance Data (Not available)
