Cisco PVDM2-12DM, PVDM2-24DM, and PVDM2-36DM Digital Modem Packet Voice Data Modules
show modem log (pvdm2)
35
Cisco IOS Release 12.4(9)T, 12.4(11)XW, and 12.4(20)T
show modem log (pvdm2)
To display the modem history event status performed on a manageable modem on a PVDM2-xxDM
device, use the
show modem log
command in privileged EXEC mode.
show modem log
slot
/
modem number
Syntax Description
Command Modes
Privileged EXEC
Command History
Examples
The following is sample output from the
show modem log
command issued on a Cisco PVDMII-xxDM
device with V12 digital modems. A specific modem, 0/323, is designated.
Router#
show modem log 0/323
Modem 0/322 V12: Event Log contains 72 Events:
00:15:31.116 CSM: Incoming call from Unknown to 223
00:15:31.116 CSM: event-ISDN_CALL New State-IC_MODEM_RESERVED
CSM: status-1 dchan-0/3 bchan-0
00:15:31.068 Cmd: PCMENCODE
00:15:31.068 Cmd: CMDDAT Config Change ATS
5B 0D DF 17
00:15:31.068 CSM: event-ISDN_CONNECTED New State-WAIT_FOR_CARRIER
00:15:31.036 CSM: event-CSM_EVENT_MODEM_SETUP New State-WAIT_FOR_CARRIER
00:15:31.036 Ntf: PCMENCODE
00:15:31.032 Ntf: CMDDAT Config Acknowledge ATS
Pass Pass
00:15:31.032 Ntf: CMDREQ
00:15:31.012 Cmd: LINECON
00:15:31.012 Ntf: ANSDET
00:15:14.092 Cmd: CMDDAT Statistic--Data Transfer Information
00:15:14.092 CSM: event-MODEM_CONNECTED New State-CONNECTED_STATE
00:15:14.092 Ntf: CHANCON
00:15:14.088 Ntf: CMDDAT Statistic--Data Transfer Information
Error correction 77 LAP-M
Data compression 68 V44
Modulation type 206 V.34
receive speed 16 33600
transmit speed 16 33600
error correction frames sent 0
error correction frames rcvd 0
characters transmitted 0
characters received 0
synchronous frames sent 0
synchronous frames rcvd 0
bad synchronous frames rcvd 0
slot
/
modem number
(Optional) Slot and modem number. If this number is not specified, statistics
for all connected modems are displayed. (Include the forward slash (
/
) when
entering this variable.)
Release
Modification
12.4(11)XW
This command was introduced.
