Administering Your Cisco RV120W
Using the Management Interface
Cisco RV120W Administration Guide
119
7
Configuring Web Access
You can enable access on the LAN interface of the Cisco RV120W. If a user
connects a PC to the LAN port, web access is then allowed using secure HTTP.
To enable web access on the LAN port:
STEP 1
Choose Administration > Management Interface > Web Access.
STEP 2
In the LAN section, under HTTPS Web Access on LAN Interface, check Enable.
Configuring Remote Management
You can enable remote access so that administrators can log in remotely to the
system and access the web interface. To enable remote management:
STEP 1
Choose Administration > Management Interface > Remote Management.
STEP 2
Under Remote Management, check Enable.
STEP 3
Choose the Access Type:
•
All IP Addresses—The Cisco RV120W can be accessed from any IP
address. Be sure to change the password if you select this option to prevent
unauthorized persons from accessing your network.
•
IP Address Range—If you want to restrict access to certain computers, you
can select a range of IP addresses. Only computers having IP addresses in
this range can access the Cisco RV120W management interface. Choose
one of the following:
-
IP Address Range—Allow access to the Cisco RV120W only from
computers that have IP addresses in the specified range.
-
Single IP Address—Allow access to the Cisco RV120W only from a
computer that has a specified IP address.
STEP 4
If you chose IP Address Range, enter the start and end of the IP address number
range. If you chose Single IP Address, enter the IP address.
STEP 5
Enter the port number if you want to restrict access to only come from a specified
port on the machine that is connecting remotely.
STEP 6
You can enable Simple Network Management Protocol (SNMP), which allows you
to monitor and manage your router from an SNMP manager. SNMP provides a
