Configuring Networking
Configuring the WAN (Internet) Settings
Cisco RV120W Administration Guide
22
2
STEP 5
Enter MAC Address information. (See
Configuring the MAC Address, page 24
.)
STEP 6
Click
Save
.
Configuring PPTP
If you have a Point-to-Point Tunneling Protocol (PPTP) connection to the Internet:
STEP 1
Choose
Networking
>
WAN (Internet) > IPv4 WAN (Internet)
.
STEP 2
From the
Internet Connection Type
drop-down menu, choose
PPTP
.
STEP 3
Enter this information:
STEP 4
Enter MTU information. (See
Configuring MTU Settings, page 24
.)
User Name
Enter your username assigned to you by the ISP.
Password
Enter your password assigned to you by the ISP.
MPPE Encryption
If your ISP supports Microsoft Point-to-Point
Encryption (MPPE), check to enable MPPE
encryption.
Connection Type
Choose the connection type:
•
Keep connected—The Internet connection is
always on.
•
Idle Time—The Internet connection is on
only when traffic is present. If the connection
is idle—that is, no traffic is occurring—the
connection is closed. You might want to
choose this option if your ISP charges based
on connection time.
Idle Time
If you choose Idle Time as the connection type,
enter the number of minutes after which the
connection terminates. The valid range is
5
–
999
.
My IP Address
Enter the IP address assigned to you by your ISP.
Server IP Address
Enter the IP address of the PPTP server.
