Configuring the Firewall
Configuring Port Forwarding
Cisco RV120W Administration Guide
79
4
•
VDOLIVE (live web video delivery)
•
SSH (secure shell)
•
SIP-TCP or SIP-UDP
STEP 5
Select the Source IP:
•
Any—Specifies that the rule being created is for traffic from the given
endpoint.
•
Single Address—Limit to one host. Requires the IP address of the host to
which this rule would be applied.
•
Address Range—This is used to apply this rule to a group of computers/
devices within an IP address range. Requires a from IP address and to IP
address.
STEP 6
If you chose Single Address in Step 6, enter the IP address in the Start field.
If you chose Address Range in Step 6, enter the starting IP address of the range in
the Start field and the ending IP address of the range in the Finish field.
STEP 7
If you chose Always Allow, Block by Schedule, or Allow by Schedule in Step 3:
a. Enter the Destination IP address, or the address where traffic meeting the rule
should be sent.
b. In the Forward from Port field, choose Same as Incoming Port if the traffic
should be forwarded from the same port number on the outgoing server.
Otherwise, choose Specify Port and enter the port number in the Port Number
field.
c. In the Forward to Port field, Choose Same as Incoming Port if the traffic should
be sent to the same port on the receiving server. Otherwise, choose Specify
Port and enter the port number in the Port Number field.
STEP 8
Click Save.
