Setting up the Interfaces of the Gateway
Setting up the Wireless LAN
SRP 521 VoIP Gateway Administration Guide
31
3
REVIEW DRAFT — CISCO CONFIDENTIAL
Wide Channel
If you selected Wide - 40MHz Channel for the Radio
Band setting, this setting will be available for your
primary Wireless-N channel. Select any channel from
the drop-down menu.
Standard Channel
If you selected Wide - 40MHz Channel or Standard -
20MHz Channel for the Radio Band setting, then this
setting will be available. Select the channel for Wireless-
N, Wireless-G, and Wireless-B networking. If you
selected Wide - 40MHz Channel for the Radio Band
setting, then the Standard Channel will be a secondary
channel for Wireless-N. The default value is channel 11.
SSID1-4
The SSID is the network name shared among all
devices in a wireless network. The gateway can
support up to four wireless networks. By default, first
and second wireless network is enabled, and you can
create the other wireless network names.
Wireless Network
Name (SSID)
The first default wireless network uses the name
“cisco_data” which is connected to the default VLAN.
The second default wireless network uses the name
“cisco_voice” which is connected to the voip VLAN. To
rename the default wireless network, enter a unique
Wireless Network Name, which is case-sensitive and
must not exceed 32 characters (use any of the
characters on the keyboard).
SSID Broadcast
Enabled
When wireless clients survey the local area for wireless
networks to associate, they detect the SSID broadcast
by the gateway. If you want to broadcast the SSID, keep
the check box selected. If you do not want to broadcast
the SSID, deselect the check box.
Enabled
To enable the wireless network, select the check box. To
disable the wireless network, deselect the check box.
Field
Description
