Configuring the Network
NAT
SRP 521 VoIP Gateway Administration Guide
51
4
REVIEW DRAFT — CISCO CONFIDENTIAL
STEP 1
Click Network Setup on the tab and then click NAT in the navigation pane. Click
Setting. The Routing page appears.
STEP 2
To enable NAT, select Enabled.
STEP 3
Click Submit to save your settings.
Single Port Forwarding
The settings for Single Port Forwarding are set on this page. It shows the current
port forwarding list and details of the selected route.
STEP 1
Click Network Setup on the menu bar and then click NAT. Click Single Port
Forwarding. The Single Port Forwarding page appears.
STEP 2
Click Add Rule. The Single Port Forwarding page opens.
STEP 3
Select an application from the list.
STEP 4
Enter a name of the application.
STEP 5
Select a WAN interface.
STEP 6
Choose an external and internal port.
STEP 7
Select a protocol.
STEP 8
Enter the IP address of the server that should receive the requests.
STEP 9
Click Enabled to enable the applications you have defined.
STEP 10
Click Submit to save your settings.
