Configuring Virtual Private Networks (VPNs) and Security
Configuring Advanced VPN Parameters
Cisco RV220W Administration Guide
123
6
STEP 3
In the
VPN Client Setting Table
, perform these tasks:
•
To add a client, click
Add
. Enter these settings:
-
Enabled—
For PPTP, check the box to activate the user account. Uncheck
the box to de-activate the user account. This setting is not applicable to
QuickVPN or XAUTH.
-
Username—
Enter the username for user authentication. For QuickVPN, it
must include at least 6 characters.
-
Password—
Enter the password for user authentication. For QuickVPN, it
must include at least 6 characters.
-
Allow User to Change Password—
Check the box if you want the user
to be able to change the password. Otherwise, uncheck the box.
-
Protocol—
Choose the type of user:
QuickVPN—
The user uses the Cisco QuickVPN client and is
authenticated by the VPN server.
PPTP—
The user is authenticated by a PPTP server.
XAUTH—
The user is authenticated by an external authorization server,
such as a RADIUS server.
•
To edit a client, check the box and then click
Edit
. To select all entries, check
the box in the heading row. Then edit the information, as described above.
•
To delete a client, check the box and then click
Delete
. To select all entries,
check the box in the heading row.
STEP 4
Click
Save
to save your settings, or click
Cancel
to reload the page with the
current settings.
.