Administering Your Cisco RV220W
User Management
Cisco RV220W Administration Guide
167
9
User Log in Policies by IP Address
You can allow or deny access to a user based on his or her IP address.
•
Managing IP Address Login Policies, page 167
•
Configuring an IP Address Login Policy, page 168
Managing IP Address Login Policies
Use the
User Policy By Source IP Address
page to choose a policy type and to
view, add, edit, and delete IP addresses.
To open this page:
From the
Administration > User Management > Users
page,
select a user then click
Policies By IP
.
The Username cannot be changed on this page.
STEP 1
At the top of the page, choose the type of policy:
•
Deny Log in from Defined Browsers—
Choose this option to prevent a user
from logging on when using an IP address in the
Defined Addresses
list. A
log in is allowed from a browser that is not in the list.
•
Allow Log in only from Defined Browsers—
Choose this option to allow a
user to log on only when using an IP address in the
Defined Addresses
list.
STEP 2
In the
Defined Addresses
table, perform these tasks:
•
To add an address, click
Add
. Then enter the settings on the
Defined
Address Configuration
page. See
Configuring an IP Address Login Policy,
page 168
.
•
To edit an address, check the box and then click
Edit
. Then enter the settings
on the
Defined Address Configuration
page. See
Configuring an IP
Address Login Policy, page 168
.
•
To delete an address, check the box and then click
Delete
. To select all
addresses, check the box in the heading row, and then click
Delete
. Click
Save
to continue with the deletion, or otherwise click
Cancel
.
STEP 3
Click
Save
to save your settings, or click
Cancel
to reload the page with the
current settings.
