Administering Your Cisco RV220W
Network Management (SNMP)
Cisco RV220W Administration Guide
170
9
•
To edit an entry, check the box and then click
Edit
. Then enter the settings on
the
Add / Edit Trap Configuration
page. See
Configuring SNMP Traps,
page 171
.
•
To delete an entry, check the box and then click
Delete
. To select all entries,
check the box in the heading row, and then click
Delete
. Click
Save
to
continue with the deletion, or otherwise click
Cancel
.
Configuring the User Security Settings for SNMP
Use the
Add / Edit SNMPv3 User Configuration
page to configure the SNMPv3
security settings for the default Administrator and Guest users.
To open this page:
From the
Administration > Network Management > SNMP
page, select a user and then click
Edit
.
The Username and Access Privilege cannot be changed.
STEP 1
In the
Security Level
field, choose the appropriate settings for your SNMP
manager.
•
NoAuthNoPriv
—Doesn't require any Authentication and Privacy.
•
AuthNoPriv
—Submit only the Authentication Algorithm and Password.
•
AuthPriv
—Submit Authentication Algorithm, Authentication Password,
Privacy Algorithm, and Privacy Password.
STEP 2
Based on the selected Security Level, complete all available fields:
•
Authentication Algorithm
—Choose an authentication algorithm from the
drop down list - MD5 and SHA
•
Authentication Password
—Enter the authentication password for the user.
•
Privacy Algorithm
—Choose a privacy algorithm from the drop down list -
DES or AES
•
Privacy Password
—Enter the privacy password for the user.
STEP 3
Click
Save
to save your settings, or click
Cancel
to reload the page with the
current settings. Click
Back
to return to the
Administration > Network
Management > SNMP
page.
