Administering Your Cisco RV220W
Network Management (SNMP)
Cisco RV220W Administration Guide
171
9
Configuring SNMP Traps
Use the
Add / Edit Trap Configuration
page to identify SNMP agents to which the
router will send trap messages (notifications).
To open this page:
From the
Administration > Network Management > SNMP
page, in the
Traps Table
, click
Add
or select a trap and then click
Edit
.
STEP 1
Enter these settings:
•
IP Address—
Enter the IP address of the SNMP manager or trap agent.
•
Port—
Enter the SNMP trap port of the IP address to which the trap
messages will be sent.
•
SNMP Version—
Choose the SNMP Version:
v1
,
v2c
, or
v3
.
•
Community—
Enter the community string to which the agent belongs. Most
agents are configured to listen for traps in the Public community.
STEP 2
Click
Save
to save your settings, or click
Cancel
to reload the page with the
current settings. Click
Back
to return to the
Administration > Network
Management > SNMP
page.
SNMP System Information
Use the
Administration > Network Management > SNMP System Information
page to specify reference information for your SNMP Management Information
Base (MIB).
To open this page:
In the navigation tree, choose
Administration
>
Network
Management
>
SNMP System Information
.
STEP 1
Enter the following MIB (Management Information Base) settings:
•
SysContact
—Enter the name of the contact person for this router. Examples:
admin, John Doe.
•
SysLocation
—Enter the physical location of this router. Example: Rack #2,
4th Floor.
