Firewall
Advanced Firewall Settings
Cisco RV220W Administration Guide
90
4
Adding or Editing a Schedule
Use the
Add/Edit Schedules Configuration
page to configure a schedule for a
firewall access rule or a port forwarding rule.
To open this page:
From the
Firewall > Advanced Settings > Schedule
s
page,
click
Add
or select a schedule and then click
Edit
.
STEP 1
Enter these settings:
•
Name—
Enter a unique name to identify the schedule in the
Schedule Table
on the
Firewall > Advanced Settings > Schedule
s
page.
•
Time—
Choose one of the following options:
-
If this schedule applies to the entire day, check the
All Day
box.
-
If this schedule applies during specified hours of the day, uncheck the
All
Day
box. Then enter the
Start Time
and
End Time
by choosing the
Hours
,
Minutes
, and time period (AM or PM). The schedule will become
active at the specified start time and will become inactive at the
specified end time on the selected day(s).
•
Repeat—
Choose one of the following options:
-
If this schedule applies to all the days of the week, check the
Everyday
box.
-
If this schedule applies only on specified days, uncheck the
Everyday
box. Then check the box for each day when the schedule is active.
Uncheck the box for each day when the schedule is inactive.
STEP 2
Click
Save
to save your settings, or click
Cancel
to reload the page with the
current settings. Click
Back
to return to the
Firewall > Advanced Settings >
Schedule
s
page.
