7
Cisco Smart+Connected Remote 250 Reference Guide
OL-27366-02
Install and Use the Optional Recharging Kit
Step 2
Insert the rechargeable battery into your new or existing remote.
a.
On the bottom of the remote (with the cover off and the old batteries taken out), insert the
rechargeable battery by sliding the small end into the slot first (Figure 3). Note the orientation of +
and - symbols for proper battery insertion (
Figure 5
).
Figure 5
Rechargable Battery
b.
Seat the battery securely into the slot and push down (
Figure 6
).
Figure 6
Battery Installed
Step 3
Place the new cover on your existing remote.
If you’ve purchased a new remote with your recharging station, follow Step 2; otherwise, follow both
steps.
Note
If you are using an existing remote with the new battery cover, it will appear that the paint color
and texturing may be different. With normal usage, the new battery cover color and texture will
blend to match the remote control. You should expect this to occur over a period of 1-2 months.
a.
Insert the remote’s new battery cover into the remote. Notice the two metal plates on the cover; that’s
how you can differentiate the old cover from the new one (
Figure 7
).
