13
Cisco Smart+Connected Portable Tablet Reference Guide
OL-27364-01
Configuration
Step 3
Configure the wireless settings (if not using Wi-Fi, skip to
Step 4
).
a.
On the touchscreen, tap
More
>
Settings
>
Network
.
b.
Under
Wireless
, select
Enable
.
c.
If you don’t see the network you want, select
Other
.
d.
At
Network Name
, select to add the SSID or name of the wireless network when the keyboard
appears.
e.
At
Security
, select
None
,
WEP
, or
WPA
.
f.
At
Password
, type the password given to you by the person who set up the wireless network.
g.
Select
Connect
. Notice that the IP settings change.
Step 4
The IP address is set to DHCP by default. If you need to set a static IP address, complete the following
steps; otherwise, you are finished with these steps.
a.
On the touchscreen, tap
More
>
Settings
>
Network
(if necessary).
b.
On the
Network
page, tap
Static
(see
Figure 1-9
).
Figure 1-9
Static IP Address
c.
Select each field and use the keyboard to enter the IP Address, Subnet Mask, Default Gateway and
DNS server(s).
d.
Tap
Done
when each field is complete.
e.
Tap
OK
to return to the Network page.
You can now connect to a Director (a Cisco Controller running on the network).