Installing the Twisted Pair PDU
4013399 Rev C
43
CAUTION:
If installing the Twisted Pair PDU with PTCs installed (part numbers 750595
and 750596), use extreme caution when inserting the IDCs, to prevent
unwanted AC power transmission on the twisted pair.
5
Simultaneously, push the ends of the two twisted pair wires through the small
holes and into the respective hot and ground connectors.
Note:
The connector is labeled HOT and GND.
6
Press down on the IDC connector until it is fully seated.
7
Continue with additional twisted pair connections if necessary, and then proceed
to the next step.
Summary of Contents for Surge-Gap Multimedia Tap
