8
Read before you mount the monitors
78-100254-03A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Installation guide for Cisco TelePresence MX700 Single camera - Wall mount
Page 12
The monitors are heavy
We recommend three people working together
to mount the monitors. Two people should lift the
monitor using the handles as described here. The
other person must help stabilizing the monitor and
check that the monitor enters the slots properly.
Use lifting handles
To avoid trapping your fingers, use the lifting
handles at the bottom of the monitor.
The screws with wing nut, which you can see from
the sides of the monitor, must enter the center slot
on each side of the lower frame.
Note to Step 9 and Step 11
When you lift and place the monitor onto the
wall brackets, keep the monitor close to the
wall so the clamps on the rear side of the
monitor slide fully onto the top wall bracket.
