ID
Title
Description
Solution
Severity
30019 Call license limit
reached
You have reached your license limit
of <n> concurrent non-traversal call
licenses
If the problem persists, contact your
Cisco representative to buy more call
licenses
Warning
30020 Call license limit
reached
You have reached your license limit
of <n> concurrent traversal call
licenses
If the problem persists, contact your
Cisco representative to buy more call
licenses
Warning
30021 TURN relay
license limit
reached
You have reached your license limit
of <n> concurrent TURN relay
licenses
If the problem persists, contact your
Cisco representative to buy more
TURN relay licenses
Warning
30022 Call capacity
limit reached
The number of concurrent non-
traversal calls has reached the unit's
physical limit
Ensure that your registrations are
distributed evenly across all peers
Warning
30023 Call capacity
limit reached
The number of concurrent traversal
calls has reached the unit's physical
limit
Ensure that your registrations are
distributed evenly across all peers
Warning
30024 TURN relay
capacity limit
reached
The number of concurrent TURN
relay calls has reached the unit's
physical limit
Ensure that your registrations are
distributed evenly across all peers
Warning
30025 Restart required
An option key has been changed,
however a restart is required for this
to take effect
Restart the system
Warning
35001 Configuration
warning
Active Directory mode has been
enabled but the DNS hostname has
not been configured
Configure
DNS hostname
Warning
35002 Configuration
warning
Active Directory mode has been
enabled but the NTP server has not
been configured
Configure
NTP
server
Warning
35003 Configuration
warning
Active Directory mode has been
enabled but no DNS servers have
been configured
Configure a
DNS server
Warning
35004 LDAP
configuration
required
Remote login authentication is in
use for administrator or FindMe
accounts but a valid LDAP Server
address, Port, Bind_DN and Base_
DN have not been configured
Configure
LDAP parameters
Warning
35005 Configuration
warning
Active Directory mode has been
enabled but a domain has not been
configured
Configure domain on
Active
Directory Service
page
Warning
35007 Configuration
warning
Active Directory SPNEGO disabled;
you are recommended to enable the
SPNEGO setting
Enable
SPNEGO
Warning
35008 Configuration
warning
Active Directory mode has been
enabled but a workgroup has not
been configured
Configure workgroup on
Active
Directory Service
page
Warning
Cisco VCS Administrator Guide (X8.1.1)
Page 411 of 507
Reference material
Alarms