ID
Title
Description
Solution
Severity
40034 Security alert
Firewall rules activation failed; the
firewall configuration contains rules
with duplicated priorities
Check your
firewall rules
configuration
, ensure all rules have a
unique priority and re-try the
activation
Warning
40036 Delegated
credential
checking error
The traversal server zone
associated with SIP domain
<domain> cannot connect to the
traversal client system
Check that the domain and its
associated traversal server zone are
configured correctly. You may also
need to check the remote traversal
client system
Warning
40037 Delegated
credential
checking error
There is a communication problem
with the traversal client zone
<zone> used to receive delegated
credential checking requests
Check that the traversal client zone is
configured correctly. You may also
need to check the remote traversal
server system
Warning
40038 Delegated
credential
checking
configuration
error
TLS verify mode is not enabled on
the traversal server zone associated
with SIP domain <domain>
Check the domain and ensure that
TLS verify mode is enabled on the
associated traversal server zone
Warning
40039 Delegated
credential
checking
configuration
error
TLS verify mode is not enabled on
the traversal client zone (<zone>)
that has been configured to accept
delegated authentication requests
Ensure that TLS verify mode is
enabled on the traversal client zone
Warning
40040 Unified
Communications
configuration
error
TLS verify mode is not enabled on a
traversal zone configured for Unified
Communications services
Ensure that TLS verify mode is
enabled on the traversal zone; you
may also need to check the remote
traversal system
Warning
40041 Security alert
Automated intrusion protection rules
are not available
Disable and then re-enable the
failed services
Warning
40042 FIPS140-2
compliance
restriction
Some SIP configuration is not using
TLS transport; FIPS140-2
compliance requires TLS
Ensure that TLS is the only enabled
system-wide SIP transport mode on
the SIP page, and that all zones are
using TLS. Alternatively, if you are
transitioning into FIPS140-2 you may
want to restore a FIPS-compliant
backup of your data.
Warning
40043 Unified
Communications
configuration
error
Media encryption is not enforced on
a traversal zone configured for
Unified Communications services
Ensure that media encryption is set
to 'Force encrypted' on the traversal
zone
Warning
40044 System reset
required
FIPS140-2 mode has been enabled;
a system reset is required to
complete this process
Ensure that all alarms are cleared,
then take a system backup before
performing a system reset
Warning
40045 Restart required
FIPS140-2 mode has been
disabled; a system restart is
required to complete this process
Restart the system
Warning
Cisco VCS Administrator Guide (X8.1.1)
Page 415 of 507
Reference material
Alarms